Products PDF Print E-mail

Types :

Proudly, Aman & Safety Group offers its customers all their needs of Safe Auto Glass that conforms to the international standards at very competitive prices.

Our Products:

1)      Windshields

2)      Backlights

3)      Front doors

4)      Back doors

5)      Sidelights

6)      Ventilators

7)      Sun roofs

Our products cover all types of vehicles:

1)      Passenger cars

2)      Trucks

3)      Buses (in all sizes)

The group produces automotive glass of all international car brands & their models which reach up to 1000 models:

1)      European

2)      American

3)      Japanese

4)      Korean

5)      Chinese

6)      Other international car brands

Features :

Laminated Auto glass
Laminated autoglass is a type of safety glass produced by interlaying 2 sheets of glass with a thin layer of PVB film (Polyvinyl Butyral) which could be clear, colored or clear with a shaded band. This technique is what keeps the glass bonded in case of breakage & does not fall into pieces; a “spider web” is created instead. That’s why it is used in the manufacturing of the car’s front windshield. The PVB & the glass are sealed through a series of pressure & then heat. Not only does the PVB absorb energy during an impact but it also prevents up to 95% of the harmful ultraviolet rays from the sun.
Tempered Auto glass
Tempered auto glass is a single layered type of safety glass used in the car’s surrounding windows (sidelights) & the back windows (backlights) in addition to the ventilators & sun roofs. This type of glass is available in all colors & with additional necessary accessories especially in the backlights such as the heaters & alarm sensors. It is produced by heating the glass up to melting point (approx 650 degrees) then rapidly cooling by air. This is what makes the tempered glass 5 times stronger than its natural state. In case of breakage, it breaks into non-edged small pieces that are not hurtful.


Quality Assurance :

Aman & Safety Group laboratories utilize advanced testing equipments to ensure a good quality in terms of visual appearance, mechanical performance and aging performance.

All quality tests conform to the European ECE R43 & the American DOT certificates in addition to other local & international standards.
Main test list:

  1. FragmentationTest(DroppingTower)
    Verifies that no harmful splinters appear in the case of breakage.
  2. G. Ball Test (Dropping Tower)
    Assesses the adhesion of the interlayer in laminated glass and mechanical strength of other toughened glass panes.
  3. Kg Ball Test (Ball Impact Test)
    Assesses ball penetration resistance of laminated glass.
  4. Headform Test (Dropping Tower)
    Verifies glass panes comply with requirements related to minimizing injuries in the case of head impact.
  5. High-Temperature Test (Bake Test) Bake Oven 250oC
    Verifies that no bubbles or other defects occur in the interlayer of laminated glass when exposed to high temperature over an extended period of time.
  6. Temperature Change Test
    Chelxs that plastic used in safety glazing will not deteriorate when exposed to extreme temperature.
  7. Humidity Test (Humidity Apparatus)
    Determines that a laminated glass pane or other glass panes with plastic will withstand effects of prolonged exposure to humidity.
  8. Abrasion Test (Horizontal Turnable with 2 Abrasive Wheel)
    Verifies sufficient wear resistance of a safety glass pane.
  9. Light Transmission Test
    Verifies sufficient visibility of safety glass panes.
  10. Optical Distortion Test
    Verifies that the windscreen does not cause distortions.
  11. Secondary Image Separation Test
    To verify that separation angle of a secondary image from the primary image does not exceed a specified value.
  12. Other Tests
-----R43 & DOT related quality tests.